Winland-electronics EA400 Manuel d'utilisateur télécharger pdf (Page 43)

D-011-0093 41

An alarm indication for any mode is shown by:

 Flashing data corresponding to the Zone where the alarm is occurring.

 An (Alarm) icon will flash during an alarm, and is solid if time delay is activated.

When time delay expires, icon will flash indicating an output relay has been

activated for the Zone in alarm.

To silence the auxiliary for 10 minutes, press the ALARM SILENCE key.

Note: Even if an alarm is silenced, the alarm display for the Zone is still displayed

until the alarm condition is corrected.

Note: If an alarm cannot be promptly corrected, and you wish to avoid repeated

alarms for the Zone, the Zone should be removed from service by setting the

Zone to Disabled ( ). Refer to Programming the Zones.

Viewing Alarm History

The Alarm History function stores up to 8 alarm events. View the alarm history as

follows:

1. Press the ALARM HISTORY key. The display shows the most recent stored alarm

alternately toggling between:

• Time of alarm occurrence, Zone number, and limit exceeded.

• Date of alarm occurrence, Zone number, and limit exceeded.

Winland_English.fm Page 41 Wednesday, July 5, 2006 1:33 PM

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 55 56

Pas de commentaire

Winland-electronics EA400 Manuel d'utilisateur Page 43