Winland-electronics VAL-1 Manuel d'utilisateur

INSTALLATION / OPERATION INSTRUCTIONS© 2012 Winland Electronics, Inc.Z1882 Rev E (08/2012)Vehicle Alert console with cable and probeCONTENTS FOR VAL-

Step 1: Probe and Console Location ConsiderationsFind a convenient location for the Vehicle Alert console with the following recommendations in mind:•

SYSTEM OVERVIEWThe Vehicle Alert is a simple to use vehicle motion detection system that operates on the principle that any moving ferrous metal objec

SYSTEM OVERVIEWThe Vehicle Alert is a simple to use vehicle motion detection system that operates on the principle that any moving ferrous metal objec

Step 1: Probe and Console Location ConsiderationsFind a convenient location for the Vehicle Alert console with the following recommendations in mind:•

Installing the Probe in Driveways Not Exceeding 20 Feet in WidthIf the driveway to be monitored doesn’t exceed 20 feet in width, the probe can be buri

If burying a probe in the center of a gravel driveway, the probe and cable should be buried about 18 inches below ground level. To protect the probe a

Power ConnectionsBefore plugging in the 12VDC power supply to a wall outlet, connect the appropriate wires on the cable assembly to the power supply (

Power ConnectionsBefore plugging in the 12VDC power supply to a wall outlet, connect the appropriate wires on the cable assembly to the power supply (

If burying a probe in the center of a gravel driveway, the probe and cable should be buried about 18 inches below ground level. To protect the probe a

Installing the Probe in Driveways Not Exceeding 20 Feet in WidthIf the driveway to be monitored doesn’t exceed 20 feet in width, the probe can be buri