Winland-electronics EA800-ip Manuel d'utilisateur télécharger pdf (Page 34)

34 D-011-0152

Configuring the Relays

When all sensors have been added, you may change the default relay configurations. If the defaults are

acceptable, it is not necessary to configure the relays. Perform the following procedure to configure all relays used:

Note: The default relay settings are:

• Relays 1-8 (Active Condition = Alarm Only);

• Aux Relay (Active Condition = Alarm or Warning);

• All Relays (No Alarm - Relay State = De-Energized)

Repeat this procedure to configure the next relay.

Return to the Home screen when you have configured all

relays.

To create a backup copy of the complete configuration, see

“Saving Configuration Settings” on page 51.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

Installation/Owner’s Manual 1
Table of Contents 3
4 D-011-0152 4
How to Use This Manual 6
Block Diagrams 7
8 D-011-0152 8
Symbol Definition 8
Monitoring Screens 9
10 D-011-0152 10
Figure 4 EA800 Console Keys 10
Table 2 Key Functions 10
Key Function 10
Console Connections 11
12 D-011-0152 12
Access Control and Passwords 13
14 D-011-0152 14
Humidity Sensors 16
4-20mA Sensors 16
Water Sensors 18
Multi-Function Sensors 18
Dry Contact Sensors 18
Sensor Parameter Descriptions 19
20 D-011-0152 20
General Information 21
D-011-0152 21 21
Relay Setting Description 21
Installation 22
Install the Wired Sensors 23
Install the Wireless Sensors 23
Connecting Wired Sensors 25
Console-Powered 26
External Adapter-Powered 26
Programming 27
Example shown, set values as 28
Adding Wireless Sensors 29
30 D-011-0152 30
D-011-0152 31 31
Adding Wired Sensors 32
Adding a 4-20mA Sensor 33
Configuring the Relays 34
Operation 35
Viewing Sensor Settings 36
Viewing Active Alarms 36
Viewing the Alarm Log 37
Viewing the Event Log 38
Viewing the Sensor Log 39
Viewing Firmware Information 39
Viewing RF Information 40
Maintenance 41
42 D-011-0152 42
Replacing a Sensor 43
Editing Sensor Parameters 44
Deleting a Sensor 45
Changing the Date Format 45
Changing the Time Format 46
Changing the Buzzer Setting 47
Changing the Password 48
Clearing the Alarm Log 49
Clearing the Sensor Log 49
Updating the Firmware 50
Saving Configuration Settings 51
52 D-011-0152 52
Exporting the Stored Logs 53
Exported Event Data 54
Exported Sensor Data 54
Troubleshooting 55
Verifying RF Signal Strength 56
Specifications 57
Accessories 58

Commentaires sur ces manuels

Pas de commentaire

Winland-electronics EA800-ip Manuel d'utilisateur Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Winland-electronics EA800-ip