Temp Monitoring with Separate High and Low Output
© 2012 Winland Electronics, Inc.
D-011-0114 Rev B (08/2012)
SPECIFICATIONS
Power Requirement No power required to operate.
Operating Temperature Alarm Use: 50 to 130° F (10 to 54° C); non-condensing environments only.
Alarm contacts may not function outside of this range.
Display Use: -30 to 130° F (-34 to 54° C); non-condensing environments only.
Low Limit Adjust Range -30 to +120° F (-34 to +49° C)
High Limit Adjust Range -20 to +130° F (-29 to +54° C)
Temp Accuracy ±3° F (±1.7° C)
Temp Response Time TC = 14 minutes
Temp Sensing Element Bimetallic Coil
Outputs Gold plated N.O. dry contacts (Not for high voltage use.)
Contact Output Rating 50mA @12VDC
Weight 12 oz (340 g)
Dimensions 6.25 x 3.75 x 1” (15.9 x 9.5 x 2.5 cm)
Material ABS
Mounting Key slot
CONTENTS
This package contains:
• 1 Temp Alert TA-2HL with 15’ (4.7 m) conection cable
• 2 Mounting Screws with wall anchors
• 1 Mounting templage (attached to the manual)
• 1 Installation/Operating Instructions Guide
TA-2HL
ONE YEAR LIMITED WARRANTY
Winland Electronics, Inc. (“Winland”) warrants to the end user/purchaser that each product of its manufacture shall be free from defects in
material and factory workmanship for a period of one year from the date of purchase, when properly installed and operated under normal
conditions according to Winland’s instruction.
Winland’s obligation under this warranty is limited to correcting, without charge, at its factory any part or parts thereof which shall be
returned to the factory, by the original purchaser, transportation charges prepaid, within one year of the date of purchase and which upon
examination, shall disclose to Winland’s satisfaction to have been originally defective. Correction of such defects by repair to, or supplying
replacements for, defective parts shall constitute fulfillment of all Winland’s obligations to purchaser under this limited warranty. Repair
service performed by Winland after one year from date of purchase will be for a reasonable service charge.
This limited warranty shall not apply to any of Winland’s products which have been subject to misuse, negligence or accident or which have
been repaired or altered outside of Winland’s factory. The warranty is void if the Product’s housing or cover is removed.
Winland shall not be liable for loss, damage or expense resulting, directly or indirectly, from the use of its products or any other cause.
This warranty shall be null and void in its entirety if: (i) the product is altered or modified in any way that is not consistent with the
manufacturer’s instructions, or (ii) the product is used with or connected to a device: (a) that such product is not intended to be used with or
connected to, (b) is not otherwise consistent with the manufacturer’s instructions, or (c) is not otherwise approved by the manufacturer.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSES, NON-INFRINGEMENT AND TITLE, AND ANY WARRANTIES ARISING FROM COURSE
OF DEALING, USAGE OF TRADE OR OTHERWISE. ALL OTHER REPRESENTATIONS MADE TO THE END USER/PURCHASER BY ANY OTHER PARTY
ARE ALSO EXCLUDED.
WINLAND SHALL NOT BE LIABLE TO ANY PERSON FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY DESCRIPTION,
WHETHER ARISING OUT OF WARRANTY OR OTHER CONTRACT, NEGLIGENCE OR OTHER TORT, OR OTHERWISE. Under no circumstances shall
Winland’s liability under this limited warranty exceed the purchase price paid by the end user/purchaser for the product.
No person, agent or dealer is authorized to give warranties on behalf of Winland nor to assume for Winland any other liability in connection
with any of its products.
Tech Support 8:00am - 5:00pm Central Time
(800) 635-4269 • +1-507-625-7231 P
www.winland.com
WEEE Product Recovery/Recycling for EU Customers
In an effort to improve waste management in the European Union, the European Union has enacted directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE Directive). According to the WEEE Directive, Winland Electronics must take back waste electrical or electronic
equipment covered under the WEEE Directive, at its cost, for all product it puts on the market after July 1, 2006. The Return Process: Contact
Winland via our web site at www.winland.com.
Applicable Directives
RoHS Directive 2002/95/EC; WEEE Directive 2002/96/EC
Statement of Compliance:
Winland Electronics, Inc. hereby declares this device is in compliance with all the applicable Directives 2002/95/EC, 2002/96/EC. This device is
considered a passive EM device and is thereby excluded from the scope of the EMC directive 89/336/EEC and Low Voltage Directive 73/23/EEC.
Symbols on the Product or Manual Labeling
For product disposal, ensure the following:
• Do not dispose of this product as unsorted municipal waste.
• Collect this product separately.
• Use collection and return systems available to you.
WEEE Waste Electrical and Electronic Equipment
RoHS Restriction of Hazardous Substances
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels